Features of mold making ZHUOERWEI silicone rubber Good characteristics of easy-operationGood tear and tensile strengthLow shrinkageHigh temperature resistance: 100-150CDurable and can be used hundreds of timesAdjustable Hardness for customers’ requirements

Operation Instruction of manual mold silicone:Manual mold silicone is a flow-able liquid, and the quality has nothing to do with the color. It consists of two component. Part A is a flow-able liquid silicone rubber, part B is the curing agent. Firstly, after your previous work of dealing with the original model, take some liquid silicone rubber , add 2%-3% ...

Key points for glossy printingThe angel between squeegee & table 60-70 degree,if manual printing about 45 degreeKeep distance between printing squeegee & screenLess pressure print very soft and slowly try to get more ink pass through the mesh to get round glossy effect.

Normally, different silicone should be choose according to different product's features, - For products size (within 20cm), with details designs, soft silicone is suitable, such as 10-20 shore A.- For products size (20cm-80cm), with intricate designs, 20-25 shore A is suitable. with simple designs, 25-30 shore A is suitable.- For prod...

1.What is silicone rubber?Silicone is an industry name, it means a lot of exact names  ,such as silicon,silicone,silicone rubber,molding silicone,manual mold silicone,manual mold design silicone,pad printing silicone,printing silicone rubber,shoe mold silicone,RTV-2,RTV-1,room temperature vulcanization silicone,liquid silicone,HTV-1 silicone,mixed compo...

After printing silicone ink color layer then print Glossy silicone ink for top coating:Glossy top coating for 1times:Glossy silicone ink ZHUOERWEIICONE INKFast dry catalyst 2% If for machine printing to use slow dry catalyst. thinner is not necessary for hand printing, 5-10% is enough for machine printing. Cure by temp of 100-120℃ 10-25 secondsHav...